29/Jul/2019 at 8:13 am #83336NiceBetta ThailandKeymaster
All About Water
Water Parameters Explained
Ever wonder what water parameters are and how they affect your Betta fish? The answer is they are the overall condition of the water in your tank.
Your fish can be affected in many ways by the condition of the water. Example: If you water condition is not idea for your fish it can make them sick. When you have a sick fish the water parameters are one of the first things that should be checked.
Regularly checking your water parameters is a must to keep your fish happy and healthy. To do this all you need is buy a test kit and a few minutes of time. This simple test will tell you the compound concentrations of your fish tanks water. An alternative way to test your water is to take it to your local pet store. Most pet and fish stores will test your water for you free of charge. Each one of the tests have different time frames in which they need to be done. Some tests need to be done daily, others need to be done every few days and weekly.
Water Parameters Explained and How They Affect Your Fish Tank
Here are the most list of the most common water conditions and parameters that affect the health of your betta fish.
- Ammonia NH3 and NH4
- Nitrite NO2
- Nitrite NO3-N and NO3-
Water Parameter – Temperature
Temperature: To check the temperature of your tank you will need an aquarium thermometer. You should check that the water temperature is in a safe range (75 F to 81 F) and stable daily.
Ammonia (NH3, NH4): Ammonia is caused by the following:
- Fish feces
- Fish urine
- Decomposing food
- Plant matter
This can be extremely harmful to your fish (especially betta fish). Continuous exposure to these conditions even in small amounts (<.25ppm) over time can cause the following irreversible damage:
- Gill burn
- Weakened immune system
- Fin damage
Ammonia poisoning is compounded when your tank water has an alkaline water pH (above 7.0).
How to Avoid Ammonia Poisoning
The following steps will help to prevent ammonia poisoning:
Cycle your tank water – You need to cycle your tank water before adding your betta fish.
Full water change – A 100% water changes must be performed before any ammonia becomes present.
Remove uneaten food – Remove any unwanted food from your tank in a timely manner.
Remove decaying plants – Remove any decaying plant matter as this will decompose and become ammonia in your tank.
Water Parameter – Nitrite
Nitrite (NO2): Autotrophic bacteria consume ammonia and give off Nitrite as a waste product. Nitrites are slightly less harmful to betta fish but they are still very dangerous to your betta. This compound is formed when ammonia is present in your tank water and has not been processed by other bacteria. This usually happens when your tank is going through the Nitrogen Cycle.
How to Avoid NO2 Poisoning
You will need to do a full water cycling of your tank before adding your betta fish to it. When a full water cycle can not happen you may want to consider not using a filter. Filters house bacteria that produce Nitrites which will introduce them into your tank.
Nitrate (NO3-N, NO3-): Nitrates are the byproduct of the bacteria that consumes nitrite. It is less toxic to bettas and most other aquarium fish.
How to Avoid NO3-N and NO3 Poisoning
To keep nitrate levels under control you will need to do a partial water change once a week. Changing about 20% of the water is plenty to keep the nitrate levels under control. It is important to test for nitrates in you water weekly this will ensure that your nitrate levels are staying in a healthy range.
Healthy nitrate range 20 – 30 ppm however you want to shoot for less than 20.
Water Parameter – pH Levels
pH – There are 2 types of pH levels that affect your fish.
- Acidic (acids)
- Alkaline (bases)
pH levels are measured using a number scale. Example: If your water has an equal amount of acids and bases it will be neutral and should read as a pH level of 7.0 when you test it.
Acidic water will have a pH less than 7.0
Alkaline water will have a pH greater than 7.0
Most aquarium fish thrive in a neutral pH environment.
How to Test Your Water pH Levels
ou will need to have a pH water testing kit and you can get this from any pet or fish store.
You should test your aquarium water at least once a month and anytime you have a sick fish or a fish death. pH levels should not fluctuate more than 0.2 in a 24 hour time period.
Water Parameter – General Hardness (Gh) Levels
Gh: (General Hardness) – General Hardness is used to measure how hard or soft your water is also known as“hard water” or “soft water.” The hardness of water can be measures by the amount of calcium and magnesium dissolved in you water. Betta fish can tolerate a large range of gh.
Water Parameter – Carbonate Hardness (Kh) Levels
Kh: (Carbonate Hardness): KH is also known as buffering capacity. The Kh measures the amount of carbonate (CO3–) and bicarbonate (HCO3-) present in your water. The kh becomes important when it is low. Proper Kh allows your water to work like a “buffer”, this will keep your pH stable. When your Kh is low, your water can no longer keep your pH stable. This can cause a rapid drop in pH levels. A rapid drop in pH levels can cause your fish to die quickly. If you do not have good Kh levels in your tank, you will likely have to add “buffers” to your water at every water change to keep your pH stable.
Do you have any question this?
We would love to hear them in the comments below!
Did you find this interesting? So will your friends! Use the buttons below to share with your friends and the world! 🙂
If you looking for high quality betta fish please think about us https://www.youtube.com/watch?v=Ruh97DTBWf0&t=10s
- You must be logged in to reply to this topic.